The enclosed vehicle carrier has a multifunctional mechanism that smooths the operation of loading vehicles to avoid scratches and damages during loading.
What is an Enclosed Car Carrier?
An enclosed car carrier is intended for protection from weather, road debris, and dust, as well as any other foreign materials a vehicle may encounter while on the road. Unlike open car carriers that fully shows the vehicle, an enclosed carrier has a closed system, sometimes equipped with a soft or hard top which provides full cover. These carriers are normally used to ship high end, classic, or luxury vehicles and any other car that requires special protection during transport.
Incremental Steps of Placing Vehicle on an Enclosed Auto Carrier
The process of placing a car on an enclosed carrier is quite intricate, requiring careful attention to detail during both the planning and implementation phases. The following outlines the steps to be taken:
- Pre-Loading Inspections
Before a car is loaded on a carrier, there are steps that need to be done, and inspecting the vehicle happens to be one of those steps. The reasoning behind this for this procedure is as follows:
- Documenting Vehicle Condition: Executing an examination prior to shipment on a leased vehicle allows the shipping firm to address damage claims that affect their cash relations with the lessee. This demonstrates that the shipping firm similarly stands to profit by as the firm concerned appears to be taking steps towards damage dispute reduction.
- Taking photos: In some cases, the car shipping firm has the optional right to photograph the vehicle completely for their internal purposes or in case of claim disputes that may arise later on.
- Check for leaks, and Battery charge: Aside from other prerequisites, a vehicle should be compliant to the carrier’s requirements. From the perspective of the examiner, however, the vehicle should not leak fluids and must have enough charge on the battery to start the engine.
- Enclosed Carrier Positioning Methods
Upon inspection, the car carrier driver aligns the enclosed car carrier to the side of the car. For mobility reasons, enclosed car carriers are typically bigger than average transport vehicles which requires the truck driver to turn the truck to ensure that the loading process will be safe and efficient.
– Grounds and Area: The space surrounding the car need to be devoid of any interference since obstructions will make it hard for the driver to accurately navigate the area and alter the position of the car. Ideally, the area should be flat and even because these loading areas do not incline.
- Loading Methods: Ramps
The use of a ramp is the most effective approach to load a car onto an enclosed carrier.
– Ramps and Hydraulic Lifts: Most enclosed car carriers come equipped with either ramps or hydraulic lifts. Most of the time, the carrier uses a hydraulic lift to raise the vehicle to the carrier. This is particularly useful when the vehicle is low to the ground or extraordinarily heavy.
– Vehicle Manual Loading: The vehicle can be driven onto the carrier. If the vehicle is operational, driving it up the ramp onto the flatbed of the enclosed carrier is possible.
– Profile Vehicles Assistance: For extremely low clearance vehicles, special car loading techniques and equipment are utilized. Either a gentler slope is provided or the vehicle is lowered via a mechanical device that will prevent it from scraping or scratching.
- Restrictions and Limitations in Car Transportation Regulations
The vehicle in the carrier has its restrictions on transportation. As long as it stays in the carrier untouched, if unfastening it poses the risk of its movement inside the carrier, several measures can be applied to prevent shifting the vehicle’s position as will be discussed below.
– Soft Straps: The operator Securing Devices provided for the vehicle allows soft straps designed for immobilizing the wheels or frame of the given vehicle to the carrier. The straps ensure that movement is permitted to the vehicle which if constrained may result in considerable damage or injury during transport.
– Straps: The protective materials used for the straps are generally non-marking and therefore do not cause scratches or any other cosmetic flaws.
– Chocking Methods: A number of transport firms use a device referred to as the wheel chock, which is a block that is put around the wheel of the vehicle to prevent movement within the vehicle’s surrounding space.
- Closing and Securing the Enclosed Carrier
Upon loading the vehicle, the driver will ensure that all required safe transportation measures have been taken, the vehicle in loaded, and the doors of the carrier are closed. This will now fully enclose the vehicle to protect it against weather conditions, dirt from the road, and even possible theft. Since the vehicle must be protected at all times, most enclosed carriers will use clearing mechanisms to guard the vehicle during the journey.
Why Choose Enclosed Car Transport?
It is evident that enclosed car carriers are more expensive when considering the cost difference between both types of car carriers. However, the advantages offered by enclosed car transport, provid
ed that the vehicle in question is certain, far exceed the disadvantages. Here are few reasons why enclosed transport should be given consideration.
- Protection from Weather Elements
The use of covered transport serves a superb purpose in protecting the vehicle against the rain, snow, or even extreme heat, and that is another added value of enclosed transport. Your vehicle will be sheltered throughout the journey with the enclosed car carrier.
- Prevention from Damage Caused By Road Debris
The open carriage of automobile transport, such as with open car trailers, leaves the vehicle’s paint susceptible to damage caused by debris, tires, stones, gravel, and even tire remnants. Additional protection offered by enclosed trailers shields vehicles against such threats during transport unlike open transporters.
- Added Privacy and Security
Such transport offers the advantage of privacy and security as well. Accessing or viewing the auto for potential thieves becomes near impossible because it’s fully sealed. Not showing the automobile in public sight also decreases the exposure to theft, creating more safety as it is enclosed.
- Best Suitable for Luxury and Classic Vehicles
Enclosed transport pertains to luxury and exotic or classic cars referred to as vehicles with special handling due to their value and characteristics. Such cars are more expensive owing to the added care needed as they usually come with distinctive paints or features that can be destroyed due to extreme weather. Knowing the value of such vehicles, enclosed transport offers peace of mind that it will be shielded from harsh conditions, guaranteeing thorough care and attention.
When Should You Opt for Enclosed Transport?
Highlighted decisions for enclosed auto transport will apply for some particular situations which are:
– This is great for luxurious, exotic, and classic cars as they appreciate in value and need extra care while transporting in order to maintain their condition.
– Custom or Highly Customized Cars: Vehicles with custom paint jobs and multiple aftermarket alterations tend to get more damage caused by weather or debris- such vehicles are best transported in enclosed carriers.
– Shipping Over Long Distances: While booking enclosed transport, your vehicle will be free from any possible damage during cross-country or even international travel.
Conclusion
Another transport option includes enclosed carriers for high-end automobiles which may be of classical value or in desirous condition, and require added care during transport for avoiding any wear or damage. Prior to the inspection of the vehicles, the enclosed carrier is scrupulously checked ensuring that the contents inside are in the most pristine condition.
Exotic and classic cars, as previously mentioned, do undergo meticulous detailing. Should you require car shipping that is both speedy and safe, rest easy knowing Car Shipping Source is only one call away.
